The second version of our Arrow Shark E-Starter has been very successful around the world, but we are never satisfied and have invested considerable time and effort in developing further improvements which we are now proud to announce as Version III.
The cast flywheel adapter in our Version II has been replaced by a CNC-machined billet adapter which will be even stronger and more durable for long term use. Additionally, we are now including with the E-Starter two spare pawls and springs for the billet adaptor to make sure you’ll be all set for years to come.
For this new 2011 version E-starter III, the front spinner has been re-designed with four pawls instead of two. This will make the contact timing even shorter for faster engine starts, and the gears will fully disengage as soon as your engine is running. The result is that the E-Starter has no impact on performance and will work well with either stock or modified high-rpm engines.
Along with the above upgrades, we have re-designed the main gear which is now detachable for easier maintenance and servicing – for example, if the CNC four-pawl spinner needs to be replaced, although actually that should not be needed for many years. Previously, with the E-Starter II, if the spinner was damaged the whole main gear had to be replaced.
The 2011 version E-Starter III comes to you completely assembled (as did the E-Starter II) and installation is very straightforward. It can be fitted to most brands of 26cc or 29cc marine engines currently in the market such as Zenoah, RCMK and QuickDraw, and can start both single cylinder and twin inline engines. In order to fit the E-Starter to those engines all that is required is to simply replace the Zenoah pulley with the CNC billet flywheel adaptor that comes with the E-Starter kit, and then just bolt on the E-Starter III.
The power source of the 2011 version E-Starter is our OEM 580 series high torque electric motor; this has more power and torque compared with other 540 or 550 motors and makes servo-controlled onboard and on-the-water starting easier than ever. The new motor is equipped with a built-in fan for better cooling and more efficient temperatures during operation. In order to run the 580 motor properly, you will need a 14.8volt LiPo battery of 2200Mah or higher capacity, and a suitable charger for it.

Please Download 2011 Onboard E-Starter III owner Manual HERE